Dishwasher not getting water

Dishwasher not getting water


A dishwasher that isn’t getting water can disrupt your kitchen routine and prevent your dishes from getting properly cleaned. This issue can occur for various reasons, and it’s crucial to identify and resolve it to ensure your dishwasher operates efficiently. In this guide, we’ll explore common causes of a dishwasher not getting water and provide troubleshooting steps to help you diagnose and potentially address the problem.

Common Causes of a Dishwasher Not Getting Water

  1. Water Supply Issue: Problems with the water supply, such as a turned-off water valve, a kinked or blocked water supply hose, or low water pressure, can prevent the dishwasher from receiving water.
  2. Faulty Water Inlet Valve: The water inlet valve, responsible for allowing water to enter the dishwasher, may become clogged, damaged, or faulty, preventing water flow.
  3. Blocked Filters: Dirty or clogged filters in the dishwasher, such as the inlet filter or the filter screen in the water inlet valve, can obstruct water flow.
  4. Float Switch Problems: The float switch, which monitors the water level inside the dishwasher, can become stuck or malfunction, causing it to prevent water from entering the appliance.
  5. Control Board Issues: Malfunctions in the dishwasher’s control board or electronic components may prevent the dishwasher from initiating the water filling process.

Troubleshooting Steps for a Dishwasher Not Getting Water

  1. Check Water Supply:
    • Verify that the water supply valve to the dishwasher is fully open and not obstructed.
    • Inspect the water supply hose for kinks, bends, or blockages. Straighten any kinks and ensure the hose is properly connected to both the dishwasher and the water source.
  2. Inspect the Water Inlet Valve:
    • Examine the water inlet valve for visible damage, clogs, or signs of wear. If you notice issues, consider replacing the valve following your dishwasher’s specifications.
  3. Clean Filters:
    • Remove and clean the dishwasher’s filters, including the inlet filter and any filter screens, to ensure they are not clogged or obstructed. Clean filters can help with proper water flow.
  4. Check the Float Switch:
    • Locate the float switch inside the dishwasher and ensure it moves freely up and down. If it’s stuck or appears damaged, it may need to be repaired or replaced.
  5. Inspect Control Board:
    • If you suspect control board issues, consult the dishwasher’s user manual for guidance on how to perform diagnostics or consult a professional technician for a thorough assessment.
  6. Run a Test Cycle:
    • After addressing potential issues, run a test cycle with the dishwasher empty to see if it successfully fills with water.
  7. Consult a Professional:
    • If the dishwasher still doesn’t get water despite troubleshooting, or if you suspect a more complex issue with internal components, it’s advisable to contact a dishwasher repair technician for a thorough assessment and repair.


A dishwasher repair that isn’t getting water can impede its ability to clean dishes effectively. By following the steps outlined in this guide and ensuring that the water supply is not obstructed, the water inlet valve is functioning correctly, and filters are clean, you can often identify and address the problem. Remember to consult your dishwasher’s user manual for specific guidance and consider seeking professional assistance if the issue persists or if you suspect a more significant problem with internal components.


Call Now Button647-303-4997