Roper Appliance Repair Service

Roper Appliances are the sensible line of home appliances from the Whirlpool Corporation. The Roper brand lineup includes home appliances like washers, dryers, ranges, refrigerators, microwaves and dishwashers that are designed to get the job done and allow you to get back to living.

We know you have better things to do than housework! That’s why Roper brand by Whirlpool Corporation offers sensible solutions for your family – simple, sturdy, affordable “workhorse” appliances … everyday basics that provide just what you need to get the job done and get on with the business of living! (Source: http://www.roperappliances.com/)

About Roper Appliances

Roper offers pragmatic solutions for your family’s kitchen and home appliance demands. Roper appliances simplifies everyday basic needs by providing high quality products that get the job done right, the first time.

Roper Stove Repair

Roper stoves and cooktops are very high end, and offer your kitchen a modern look. Ropers emphasis on sleep design with unique characteristics makes Roper a staple in any aesthetic savvy home. Dealing with a broken down Roger stove? Call the experts at Alex Appliances today!

Roper Washer Repair

Roper washing machines are nothing short of high-end. Their Wi-Fi enabled washing machines are top of the line in terms of technology. The Roper washing machines feature a sophisticated touchscreen display which let you select your washing options. Alex Appliance Repair is very knowledgeable with Roper washers. If your Roper washer ever lets you down, you know who to call!

Roper Dryer Repair

Roper dryers are the perfect match for their high end washers.Featuring Wi-Fi, these sought after dryers can let you know when the cycle is completed.  The Roper washer and dryer units, like all Roper appliances, have high aesthetic appeal.. If your Roper dryer is ever in need of a repair, call the experts at Alex Appliance Repair for same-day and warrantied services. .

Same Day Roper Appliance Repair Toronto and areas!

Alex Appliance repair technicians are always in the neigh hood. With same day Roper appliance repair services we will arrive on site soon after you call and get right to fixing your Roper appliance using our well-stocked service vans full of the most common Roper repair parts.

Appliances Repair In Toronto and GTA, Hamilton Area, Oshawa Area, Barrie area

Appliances play an important role in our lives, from the morning we wake up in the morning, till the moment we go to bed at night.

Appliance Repair Alex technicians are highly qualified and trained to repair any issue you may be experiencing with any major appliance, any model, or brand.

Services We Offer

  • Washer repair             Dryer repair                  Dishwasher repair
  • Microwave repair        Refrigerator repair        Stove and range repair
  • Cooktop repair            Range hood repair        And installation services

Roper Fault Codes

Roper Range / Stove / Oven Fault Codes
Failure Code Fault Code Description Solution
4 Digit Failure Codes (for 2 digit codes see below)
F1 – E0 EEPROM communication error 1. Disconnect power for at least 30 seconds.
2. Re-apply power and observe for at least one minute.
3. If code re-appears, replace control board (also called ERC or clock).Note: Applies to all F1-E… codes except F1-E3.
F1 – E1 EEPROM checksum error
F1 – E2 UL A/D error(s)
F1 – E4 Model ID error
F1 – E5 Calibration shifted
F1 – E6 Latch signal mismatch error
F1 – E9 Stack overflow
F1 – E3 Wiring harness cavity size does not match previously stored value The “Cavity Size Select” jumpers in the wiring harness indicate a cavity size different from that which the control was previously configured for. Check the jumpers in the harness to make sure they agree with the actual oven size.
F2 – E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).
F2 – E1 Keypad cable unplugged
F2 – E5 Cancel key drive line open
F2 – E6 Cancel key drive line open
F3 – E0 Oven temperature sensor (RTD) opened (upper oven, if double oven) Replace Oven temperature sensor (RTD)

Note: Applies to all F3-E… codes.

F3 – E1 Oven temperature sensor (RTD) shorted (upper oven, if double oven)
F3 – E2 Oven temperature is too high (Cook mode)
F3 – E3 Oven temperature is too high (Clean mode)
F3 – E4 Oven temperature sensor (RTD) opened (lower oven, if double oven)
F3 – E5 Oven temperature sensor (RTD) shorted (lower oven, if double oven)
F3 – E6 Warming drawer sensor open
F3 – E7 Warming drawer sensor shorted
F4 – E1 Meat probe malfunction – shorted Problem could be with the probe, the receptacle, or probe circuit. Check probe. Look for pinched wire. Look for condensation or contamination on probe receptacle. Replace probe if all else checks out ok.
^ top
F5 – E0 Door switches do not agree (condition exists when door switch is closed indicating an open door, and latch switch is closed indicating a locked door) 1. If door latched:

  1. Disconnect power from unit.
  2. Check wires and connectors from control to door switch, then from door switch to control. If no damage to wires and all connectors okay, proceed to step C.
  3. Replace door switch.
  4. Re-apply power.
  5. Press and hold any key down for 1 minute to clear F5 failure code from memory. F2 will appear. Press CANCEL and observe for 1 minute to ensure operation is correct.

2. If door not latched:

  1. Disconnect power from unit.
  2. Check wires and connectors from control to latch switch, then from latch switch to control. If no damage to wires and all connectors okay, proceed to step C.
  3. Repeat steps A and B for door switch.

3. Measure door switch (door open = switch open small low voltage terminals). Replace switch if defective.
4. Measure latch switch (unlatch = switch open, CAUTION – oven light contacts are closed). Replace switch if defective.
5. If corrections are made in any step, reconnect power to control. Press and hold any key for 1 minute to clear R failure code from memory. F2 will appear. Press CANCEL and observe for 1 minute to ensure operation is correct.
6. If failure remains, disconnect power and replace control.

Note: Applies to all F5-E… codes.

F5 – E1 Self clean latch will not lock
F5 – E2 Latch during CLEAN error
F5 – E5 Self clean temperature not reached within 45 minutes.
F5 – E6 Door is open, but latch is locked
F5 – E7 Self clean latch will not unlock
F6 – E0 Return line not connected If switch pulse return line is not connected, electronic control will display F6 within 60 seconds after power up. Replace control.
F7 – E1 Common switch wire is defective Common wire (+5VDC) to latch switch, and to door switch is shorted to chassis ground or neutral. A double oven will have two of each switch and one common wire.
1. Check connections at control and at the latch switch and door switch.
2. If all connections are good, then check the individual switches as outlined for the F5 failure.
^ top
2 Digit Failure Codes
F0 Board failure Replace control board (also called ERC or clock).
F1 Board failure Replace control board (also called ERC or clock).
F2 Oven temperature is too high 1. Look for welded relay contacts on bake or broil relays. If this happens, replace oven control (also called clock or ERC).
2. For SELF CLEAN models: check door lock operation.
3. Look for a high resistance connection or any other cause of high resistance in the oven temperature sensor circuit. Check sensor, sensor harness and sensor harness connection at sensor and oven control. Replace sensor if found defective.Remember: Oven control (ERC) measures resistance of sensor circuit, not actual oven temperature.
F3 Oven temperature sensor (RTD) open Replace Oven temperature sensor (RTD)
F4 Oven temperature sensor (RTD) shorted Replace Oven temperature sensor (RTD)
F5 Board failure Replace control board (also called ERC or clock).
F7 Function key stuck on ERC Replace control board (also called ERC or clock).
F8 Board failure Replace control board (also called ERC or clock).
F9 Oven door lock failure Check wiring to door lock switch (the wire harness may be connected wrong). Check for stuck lock switch.

Service Areas ON Ontario


> Toronto

> Etobicoke
> Scarborough
> North York
> Richmond Hill
> Mississauga
> Brampton
> Vaughan
> Thorn Hill
> Woodbridge
> Markham
> Pickering
> King City
> Nobleton
> Schomberg
> Oakville
> Milton
> Hamilton
> Ajax
> Oshawa
> Niagara Falls
> Bolton
> Maple
> Burlington
> Stouffville
> Whitby
> Halton Hills
> Pottageville
> Humber
> Grove
> Brookville
> Caledon
> Aurora
> Barrie
> NewMarket
> Gwillimbury
> Port Perry
> Fort Erie
> St.Catharines
> Welland
> Port Colborne
> Jordan
> Wainfleet
> Burnaby
> Lincoln
> Lowbanks
> Grimsby
> Smithville
> Oswego Park
> Port Maitland
> Caistorville
> Canborough
> Binbrook
> Empire Corners
> Newcastle
> Caledonia
> Cayuga
> Fisherville
> Walsh
> Port Ryerse
> Port Dover
> Nanticoke
> Simcoe
> Jarvis
> Delhi
> Bookton
> Waterford
> Hagersville
> Bealton
> Ohsweken
> Burfond
> Tutela Heights
> Gobles
> Brantford
> Brant
> Drumbo
> Ayr
> Glen Morris
> Branchton
> Plattsville
> Haysville
> New Dundee
> Cambridge
> New Hamburg
> Baden
> Preston
> Morriston
> Puslinch
> Kitchener
> Wellesley
> Breslau
> St.Clements
> St.Jacobs
> Guelph
> Linwood
> Ariss
> Eden Mills
> Elmira
> Floradale
> Rockwood
> Brucedale
> Georgetown
> Elora
> Oustic
> Fergus
> Moorefield
> Drayton
> Parker
> Erin
> Port Granby
> Belwood
> Teviotdale
> Arthur
> Marsville
> Petherton
> Mono
> Grand Valley
> Orangeville
> Mt Forest
> Monck
> Cardwell
> Keldon
> Loretto
> Maple Lane
> Shelburne
> Varney
> Newton Robinson
> Corbetton
> Horning Mills
> New Tecumseth
> Durham
> Honeywood
> Rocky Saugeen
> Traverston
> Flesherton
> Badjeros
> Markdale
> Feversham
> Creemore
> Angus
> Glen Huron
> New Lowell
> Berkeley
> Stayner
> Rocklyn
> Nottawa
> Minesin
> Midhurst
> The Blue Mountains
> Collingwood
> Craighurst
> Hawkestone
> Elmvale
> Wyebridge
> Coldwater
> Foxmead
> Orillia
> Atherley
> Lagoon City
> Kirkfield
> Baddow
> Rosedale
> Nogies Creek
> Bobcaygeon
> Vaughan
> Glenarm
> Beaverton
> Lorneville
> Grasshill
> Kawartha Lakes
> Cameron
> Snug Harbour
> Ennismore
> Downeyville
> Bridgenorth
> Georgina
> Port Bolster
> Cannington
> Lindsay
> Franklin Beach
> Mariposa
> Peterborough
> Little Britain
> Innisfil
> Udora
> Sunderland
> Gilford Beach
> Sonya
> Valentia
> Zephyr
> Leaskdale
> Seagrave
> Fraserville
> Coulson Hill
> LakeSide Beach
> Dranoel
> Mt Albert
> Manvers
> Bradford
> West Gwillimbury
> East Gwillimbury
> Uxbridge
> Blackstock
> Ansnorveldt
> Bewdley
> Utica
> Ballantrae
> Glen Major
> Leskard
> Kirby
> Osaca
> Whitchurch-Stouffville
> Orono
> Welcome
> Gormley
> Clarington
> Port Hope
> Courtice
> Bowmanville
 

Author: admin