Author Archive admin


Things you CAN wash in your washing machine

It is commonly known that there is a bunch of stuff that is not allowed to be cleaned in the washing machine. However, there are some things you did not expect could be easily washed in your washer. Keep in mind that the main key to having the following things thoroughly cleaned in the laundry room unit is to choose the correct temperature of the water, enable a gentle cycle, and use a small laundry bag for washing tiny items. What is also important is drying those items naturally. Our Reputable and Reliable Appliance Repair Service is here to enlist the most common items you for sure did not think you could easily wash in your washing machine.

Things to have cleaned in the washing machine

  • Mats for yoga. These can be gently washed in any washing machine, especially if you add a few towels to prevent the appliance from rolling. A gentle cycle and slightly warm water, accompanied by any detergent will be pretty enough to clean your mat. Make sure to dry it naturally.
  • Workout/sports gear. You can put certain workout items in the laundry bag and wash them in the washing machine using strong detergent to wash off all the sweat. However, do not dry those clothes in the drying machine.
  • Small kids toys. If your kid has many plastic toys he or she likes to play with, your washing machine can wash them. Keep in mind that you need to put all the items in the laundry bag. You can also add any disinfectant of your choice.
  • Sneakers and other shoes. You can easily wash your sneakers or any other shoes in the washing machine unless the manufacturer says it is not allowed due to the fabrics. Otherwise, select warm water to wash your shoes, and make sure to have previously removed the laces. You can also place the sneakers in the laundry room. Keep in mind that you can apply stain remover leaving it for half an hour before putting the shoes in the washing machine.
  • Rubber gloves, mop heads, and other house cleaning tools. After having finished cleaning your house, it is necessary to clean the tools and items you have used. Surprisingly, many of them can be washed in the washing machine. These items are rubber gloves, mop heads, various sponges, as well as scrubbing brushes.
  • Shower curtains. You can clean shower curtains manually in different solutions, but you can also put them into your washing machine with other bath towels and items. To be able to remove old stains, keep in mind that you can always use oxygen bleach. Avoid drying shower curtains in the drying machine.

Express appliance repair Toronto

The fastest and most effective appliance repair service in all of Toronto and its area offers affordable and highly efficient same day repair in Toronto, as well as other areas. The trained appliance repair professionals of our fixing company specialize in servicing a broad spectrum of essential household appliances, which undoubtedly includes both kitchen and laundry room units. Not only do we deal with a wide range of household devices issues, but also provide useful pieces of information on how to use and maintain the unit after having it repaired. Do not hesitate to get in touch with our household appliance repair to receive all the additional information and book the service.


Common kitchen problems to fix in the first place

Whether you notice that your fridge doesn’t work properly or a dishwashing machine does not clean dishes, various kitchen appliances misuse, as well as their incorrect maintenance, can lead to certain problems. The earlier you find out what is causing a certain issue, the easier it is to repair a kitchen appliance and carry on using it. Our Reputable and Reliable Appliance Repair Service specializes in professionally maintaining a wide range of kitchen appliances, not to mention laundry room units. Moreover, we are here to provide useful pieces of advice as we are perfectly aware of the average life expectancy of certain kitchen appliances. We have gathered the most common kitchen appliances you can repair by yourself. However, if the problem appears to be behind your repair skills, our largest appliance repair company in the Toronto area is here to offer express appliance Repair Toronto.

Common kitchen problems you can face and fix easily

Here we have enlisted a few common problems you can face or have already faced once and that you can fix easily:

  • Smelly freezer or refrigerator. In the majority of cases, an unpleasant smell inside a fridge or freezer is caused by sour milk that has passed its sell-by date producing a rancid smell or any other stale smell of the food that has gone bad. Another reason that causes any unpleasant odor in the appliance is the bad temperature control. What you should do is to turn the appliance off, wash all the shelves and bins with a cleaning solution of your choice, and get rid of all moldy and smelly pieces of food. Make sure to let your unit dry properly. Turn it on again and adjust the optimum temperature to avoid frost build-up, the growth of mold, etc.
  • The dishwashing machine is not cleaning. If you happen to notice that the dishes remain dirty or are not cleaned properly, there may be several reasons why this happens. You can clean the dishwasher filter and float, and maybe consider switching to another detergent. Otherwise, the dishwashing machine is a type of kitchen unit that requires the professional involvement of experienced handymen.
  • Warm refrigerator or freezer. If you notice that the refrigerator you use remains warm inside, make sure to check out the door seals or whether you are closing them completely. Although any fridge and freezer happen to generate heat, it must not be excessive.
  • The kitchen oven over- or undercooks meals. It is not necessary to replace an oven that undercooks or maybe overcooks the meals. Instead, you can find a special oven thermometer. It is more likely that your kitchen unit requires recalibration. If it does not help, the appliance requires professional maintenance performed by Toronto appliance repair specialists.
  • The electric cooktop does not operate properly. It means that the surface of the kitchen stove may be broken, or there is a child lock activated. The majority of electric cooktop issues require professional repair, which does not necessarily mean you need to buy a brand new cooktop.

We are the best and fastest appliance repair service you’ll find

Our appliance repair service in Toronto offers professional maintenance of kitchen and laundry room appliances no matter what kind of issue you have unexpectedly faced. Furthermore, professional appliance repair in Toronto is available at affordable prices. We send our trained appliance repair professionals to perform all the necessary diagnostic and repair procedures within a short period of time, delivering fast results that prolong the lifespan of your units.


Reasons why the dryer remains laundry wet

Toronto appliance repair specialists often face dryer malfunction when the laundry remains wet after the drying cycle is over. The causes and symptoms of this breakage may vary. In one case, the drying machine does not start the drying function, in the other, you take out wet laundry from the chamber despite the program has ended successfully. So, what is the problem, and how is possible to eliminate the reasons of it?

Issues causing dryer doesn’t work properly and their fixing

Let’s start with usual situations which include control errors and misuse:

  • Incorrectly set program.
  • If overloaded, the appliance will stop working.
  • The drain filter is clogged. If the water is not completely drained from the tank, the device will not proceed to the next step. The dryer technician must clean the filter.

Also, make sure the door is tightly closed. Until the electronic lock is triggered and the control module receives a signal, the program will not start. Press the door harder until it clicks.

Other possible problems are as follows:

  • Loading of dense multi-layer items. Such products require maximum drying, so set the mode again.
  • The Ironing mode is on. With this mode activated the clothes are deliberately kept slightly wet to make them easier to iron. Please choose a different option.
  • Increased room temperature. The hotter is inside the room, the longer the laundry will take out moisture. If it is not possible to move the unit to another place, ventilate the room more often.
  • The low voltage in the mains. If your model includes two heating elements for drying then electricity consumption increases.
  • The air filter is clogged. With this issue, the clothes dry for a long time and remain wet. The part retains small debris, pile, threads during the cycle. It needs periodic cleaning, therefore call for dryer repair services in Toronto.
  • The device doesn’t intake water. In this case, the drying operation is interrupted. During the drying process, the tank is cleaned of lint with water, and also it cools the condenser. If you followed the recommendations from the manual but it was not possible to restore the operation of the appliance then the reason is a breakdown.
  • The program is interrupted, the display shows an error code. The laundry is still wet. The reason is the breakdown of the heating element or its thermal sensor.
  • The fan does not work, the program is interrupted, a code may appear on the display. The point is a malfunction of the fan, the motor. The above two malfunctions can occur due to broken contacts or open circuit. The fan is running, but items are still wet.
  • The air duct that supplies hot air from the heater is clogged.
  • The drain from the container where condensate accumulates is clogged.

These and other malfunctions like the damaged controller, cycle interruption, error codes appearing, problems with the drain and water intake system should be repaired by trained appliance repair professionals providing expert dryer repair services across Toronto.

The main advice from experienced dryer technicians is to clean filters and other drying elements regularly to avoid problems with the operation of the drying appliance.


Benefits and disadvantages of the refrigerator with water dispenser

Nowadays, you will hardly surprise anyone with a multifunctional refrigerator. But even despite this, manufacturers continue endless competition for customers’ attention offering new improved models. Below, Toronto appliance repair specialists will share their experience of dealing with refrigerators with a dispenser built into the door, in other words, cooling units supplying cool water.

Why do you need a dispenser?

The first model was released in 1973 in the United States. But the technologies continue to improve and modern dispensers are able to serve not only water but also ice, both in cubes and crushed. The main advantages of such a device are:

  • Speed. You don’t need to wait for the water to cool. Just press the button and get cold water or ice immediately.
  • Energy-saving. There is no need to open the refrigerator every time to get cold water which reduces heat loss.
  • Taste. The water in the sealed chamber of the dispenser does not come into contact with other products, so it does not absorb foreign odors.
  • Benefit. Many models are equipped with built-in water filters which make it cleaner.

There are two types of dispensers whose features and specifics will be explained below.

Connected to the water supply (automatic water supply)

If the model has a connection to the water supply it is usually equipped with a special carbon filter for water. Its service life is up to one and a half years (the longer the filter’s service life, the more expensive it is). Most often, manufacturers install a filter either on the back wall of the refrigerator or in any accessible place. The dispenser is connected to the water supply system using a flexible hose. The device signals the need for replacement when the filter becomes unusable. This operation should be done by trained appliance repair professionals to avoid the unnecessary risk of harming the device.

Manual filling (manual water supply)

If a connection to the water supply is not provided then the water is simply manually poured into the container in the door of the refrigerator compartment. This is maybe not so convenient but this method of supplying water does not require additional efforts with installation or cleaning. Thus, moved by the pump, water flows from the reservoir into the glass. The same thing happens with ice. By the way, the water from the reservoir can not only be cooled but also carbonated. A carbon gas canister and special options in the dispenser are used for this.

The refrigerator with water dispenser disadvantages

Despite having numerous advantages the dispenser also has some drawbacks. First of all, the product is primarily intended for residents of hot regions and not all residents of colder climates will agree to pay extra for this function. Therefore, models of the elite price segment (Side-by-Side and French Door) which cost is already quite high are equipped with the dispenser most often.

Another important fact is that the dispenser cannot cool other liquids. The water only. You can make cocktails or drinks using chilled water but no more. If the owner of the refrigerator tries to cool the cola or tea, it can permanently disable the entire system that will require professional fridge repair services in Toronto to be fixed.

And yet, the built-in dispenser remains one of the most popular add-on options to complement modern refrigerators. Dispensers are most often equipped with AEG, Bosch, Siemens, and Whirlpool models. So, lovers of making refreshing drinks can choose from a very, very wide range of models.


What to do if the freezer is humming

The freezer buzzes for a variety of reasons. Some of them can be caused by external factors, and some may indicate malfunctions. If the unit is installed against a wall or other device, vibrations in the engine generate vibration which causes the hum. The newly bought freezer may hum for the first five to seven days until it enters operating mode.

Also, the cause of the hum can be voltage drops in the mains or setting the thermostat to maximum. The most unpleasant situation why the freezer buzzes is a motor malfunction, which our Toronto appliance repair specialists can identify and eliminate.

The reasons causing the hum of the refrigerator

If your freezer suddenly buzzes, it could happen due to the following factors:

  • The unit is too close to a wall or kitchen cabinet causing the motor vibration. As a result of this vibration, the elements that are nearby are buzzing.
  • Constant power surges in the household power supply (in addition to clicks, there may be a hum).
  • Compressor malfunction. As a rule, a short circuit of the windings. To fix it the use of professional fridge repair services in Toronto is required.
  • The freezer thermostat is set to the maximum. For this reason, the compressor is overloaded working at the limit of its capability and producing a hum.
  • You have just purchased a freezing unit and it is now going into working mode. Typically, this period lasts 5-7 days.

If the freezer shakes and twitches you don’t need to panic right away. However, you still need to pay attention to this problem. Shaking can be caused by the following factors:

  • Metal knocking when turning the engine on/off. The reason may the fasteners that have become loose.
  • Incorrect installation of freezing equipment. The appliance is not on the level. It is especially important to pay attention to the correct installation if your floor is too uneven with large differences in height.
  • After purchasing the new freezer you forgot to remove the shipping screws from the device. Check this moment and if the shipping screws are still present, remove them immediately.
  • Worn or loose compressor shock absorbers. This is the reason why strong vibration from a running engine occurs.

If you’ve listened to your unit and heard that the device squeaks or makes clattering sounds, the reason may be the following:

  • You have not defrosted the freezer for too long. That has created a lot of ice on the sides of the chamber. This ice touches the fan blades of the No Frost system creating a characteristic crackling.
  • Some internal components and parts of the device rub against each other due to improper installation of the freezer unit creating a grinding noise.
  • Compressor creaks. This indicates that this part of the device is very worn out and will soon need to be replaced.
  • The squeak can be made by the walls of the case (especially if the case is made of plastic).

Sometimes, in addition to clicks and knocks, owners of freezers notice that their appliance begins to hiss. Typically this happens due to dirt getting between the blades of the No Frost system fan. To get rid of this unusual noise, just wash the freezer.

Sounds reminiscent of gurgling and hissing may be caused by the movement of a refrigerant. This is normal and there is nothing wrong with that. But if suddenly your fridge stops running, perhaps a refrigerant leak is the reason.


The dishwasher does not complete the washing cycle

A system failure is most likely the reason that the dishwasher does not complete the cycle. However, you can try to fix the situation yourself. To do this, you need to force turning off the device by unplugging it for a few minutes. Then turn on the machine and start the program again.

If these actions do not fix the problem, the cause is a breakdown. This may be filters’ clogging, pump overheating, or breakdown of the heating element. You can try to clean the filter yourself, but a breakdown of a heating element or pump will require professional dishwasher repairs done by Toronto appliance repair specialists.

Possible reasons for the dishwasher non-stop running

If the dishwasher does not show an error code, its behavior can lead trained appliance repair professionals to certain malfunctions that have become the causes of the problem. The list of possible malfunctions causing such behavior of the dishwasher is as follows:

  • drain system blockages ;
  • malfunction or blockage of the pump;
  • inlet valve defect;
  • breakdown of the heating element or its power supply;
  • short-term or persistent failure in the control system;
  • physical defect of the control unit.

Short-term system failure

First of all, take a very close look at the symptoms of a dishwasher malfunction. When starting a short program, the machine can wash the dishes with no fail. But when starting the normal or intensive mode, it fails at the very end, leaving the dishes washed but wet. It is possible to stop the operation of the appliance only by turning it off.

When you turn on the dishwasher again, the program where the unit previously failed may refuse to start. Activating another program leads to the situation that the machine washes the dishes and fails at the very end again. Are these symptoms familiar to you? In minor details, the behavior of the machines of different brands may differ but this does not change the essence of the malfunction.

First, a short-term system failure must be excluded from the list of possible breakdowns. To do this, turn off the machine by pressing the ON/OFF button, and then de-electrify it completely by removing the plug from the socket. Wait for half an hour and then turn it on again. If there has been a system error, a reboot can fix it and the dishwasher will work as well as before.

Clogged system or pump

The second step is to check how fast the water goes down the drain. Perhaps the sewer pipe is clogged and therefore the dishwasher cannot remove the wastewater at the proper speed. If the pipe is clean, remove and check the dishwasher’s drain hose. Next, you need to clean the main filter. Also, remove the fine filter and clean it. The fine filter can be found in the bowl where the main filter is placed.

Next, you need to remove and clean the dishwasher drain pump. To get to it, you will have to turn off and pull out the machine and then remove its sidewalls. Often, a whole ball of dirt can be found on the pump impeller. If the pump is clean, it should be checked by an experienced repairman with special tools. A failed part must be replaced.

The heating element breakdown

If the dishwasher does not complete the cycle there is a chance that the heating element is broken. Not any breakdown of the heating element causing a similar behavior of the machine but only current penetration and leakage, so be careful. This can be a very dangerous breakdown so don’t delay to call for professional dishwasher repair services in Toronto.


The washing machine does not pump water

The reason for the washer doesn’t work properly having a problem with water intake can be either a breakdown of one of the machine components or different external factors. Toronto appliance repair specialists identify two groups of reasons, internal and external. The first group includes:

  • malfunction of the control unit;
  • breakdown of the intake valve;
  • inlet valve filter clogging;
  • pump malfunction;
  • door lock problem;
  • the pressure sensor and water supply breakdown.

The second group includes the following factors:

  • incorrect water/power supply connection;
  • weak water pressure (or its total absence);
  • power outages;
  • violation of operating rules.

The problems belonging to the second group usually can be eliminated by the user himself. However, if the measures taken do not help, you will have to call for professional washer repair services in Toronto.

The washer draws water too slow

If water enters the washing machine slowly, you need to check the water flow from the supply. Maybe it is just weak. You should also check the inlet tap of the washing machine water supply, it may not be fully open.

Also, there is a fine mesh filter which is located before the inlet valve. It is necessary to remove large particles presented in the water. Over time, this filter becomes clogged and the washer does not intake water as it should. To eliminate this issue, you need to make sure that the inlet valve filter is clean.

Another reason that the unit does not pump water may be the clogging of the additional water filter installed in front of the inlet hose. This filter must also be checked and, if necessary, cleaned thoroughly.

The washing machine does not draw water at all

If the washing machine doesn’t fill with the water completely, one of the following breakdowns is possible:

  • Door locking device malfunction. The common fact is that in any washing machine the hatch is blocked before washing in order to protect the user. If the machine cannot lock the door, it will not start the washing program, which means that no water will be drawn.
  • Broken water inlet valve. This component is responsible for the water supply to the washing machine. When the control device sends a signal to it, the valve opens and water flows into the machine. When a signal indicating that there is already enough water comes, the valve shuts off the water. If a malfunction occurs, the valve must be replaced by a skilled repairman.
  • Defective control module. The control unit is the central “computer” of the washing machine which performs all intelligent actions. It contains all the time data and washing program parameters. Moreover, it controls all sensors. If the control module breaks down, it is considered a rather serious problem that can be eliminated only by trained appliance repair professionals delivering reliable washer repairs in the Toronto area. Perhaps the control module can be fixed, if not, then it will have to be replaced.

Even the best-quality washer stops working after the long-term operation. Entrust the important task of washer repair to our fixing experts who accumulated extensive experience in the diagnosis and maintenance of washing machines of various types and models at home.


How to clean a glass cooktop without scratching its surface

Cleaning a glass cooktop to support its sleek look requires certain soft equipment and special cleaning solutions. Although such type of a stove is usually easier to clean than gas burners, there are nuances to be taken into consideration. Our reputable Toronto appliance repair is here to share essential tips and useful pieces of information you can memorize and apply. Let’s start from the very beginning.

The misunderstanding of the word “glass”

When talking about glass cooktops and stoves, it doesn’t actually mean they are made of pure glass. It is usually the combination of glass-blend and ceramic that, altogether, can endure heat and quick changes of temperature. Glass cooktop is usually colored, it can be either white or black. Glass cooktops are opaque, transparent, as well as translucent. The burner is heated up by heating coils that are placed underneath the cooktop surface, whereas other areas around usually remain cold. Even though the material these kitchen appliances are made of is considered durable, one should take proper care of them, avoiding scratching their surface, and cleaning properly.

How often should one clean a glass cooktop?

A ceramic stove should be cleaned after every use in order to prevent spills and grease build-up from burning. It will be much more difficult to remove afterwards if you do not do that on time. If you do not use a glass cooktop every day, make sure to clean it once a week at least.

Tools and cleaning solutions recommended for cleaning smooth surfaces

To be able to thoroughly clean the smooth surface of your kitchen appliance, you will need certain cleaning equipment and cleaning solutions:

  • Soft non-abrasive sponge.
  • Scraper made of plastic (if needed).
  • Microfiber cloth.
  • Cream cleaning solution or a cleaning spray.
  • Commercial cleaner.
  • Cleaning liquid with a degreaser.
  • White vinegar (optional).

You can use all the mentioned products or go for just one of your choice.

Cleaning a glass cooktop step-by-step

All the controls of the kitchen stove should be turned off. The surface of the unit should be absolutely cool before being cleaned. While you are waiting for it to cool down, you can prepare all the equipment and cleaning liquids you need, as well as make your own by mixing hot water, white vinegar, and cleaning solution. You can also use a commercial cream cleaning solution created for such surfaces. Whether you have gone for the cleaning liquid you prepared yourself, or a cleaning solution of any brand, make sure to apply it on the surface of the glass cooktop and wait a few minutes before actually wiping it down so that your solution can break down the grease.

Using a soft sponge of your choice, wipe down the entire top of the cooktop, rinse it with fresh water and dry with a microfiber cloth. In case there are any burnt food particles on the surface of the cooktop, use a commercial paste with gentle abrasive to remove all the burnt food and spills. You can help yourself by gently using a plastic scraper.

The fastest and most effective appliance repair service in all of Toronto

If you notice that your kitchen stove doesn’t work properly, do not hesitate to get in touch with our Reputable and Reliable Appliance Repair Service in order to receive professional help and assistance from our trained appliance repair professionals. We offer affordable express appliance repair Toronto, working with a wide range of kitchen appliances, as well as laundry room units.


Things to avoid doing on glass or ceramic cooktops

We would all agree that a smooth ceramic or electric kitchen cooktop has a better appearance than any other kitchen unit with typical coil elements. On the other hand, as the consumer of such stylish kitchen device, you should keep in mind that glass cooktops require more attention, as well as proper regular maintenance to prevent the unit from scratching and other things. Moreover, the process of cleaning such appliance is totally different. Also, there are a number of things that one should avoid doing on ceramic or glass stoves. Our Reputable and Reliable Appliance Repair Service is here to share some essentials anyone can follow in order to prolong the lifespan of your kitchen unit.

Things you should never do on your smooth glass stove

Whether you have an electric kitchen range with a smooth cooktop or a built-in cooktop as a separate unit, avoiding the following things should gradually become your habit. Apart from cleaning the kitchen appliance regularly, you should assiduously follow certain simple tips:

  • Avoid using abrasive cleaners on the surface of your ceramic cooktop. Metal pads are not recommended to be used, either. The thing us, such rough materials can easily scratch the surface of the appliance. To be able to properly clean a glass cooktop, make sure to select cream cleaning solutions that are made for such types of surfaces.
  • It can be difficult sometimes but avoid dragging heavy cookware on the surface of your cooktop. By doing so, you can easily scratch the area so it is better to lift a heavy pot and carefully transfer it to another place.
  • Keep in mind that all your pots and other cookware must be very clean, especially on the bottom. If there is any trace of a grease build-up there, it will leave a circle or marks on the smooth surface of your kitchen appliance.
  • The worst thing about cooking or boiling something in the pot is accidentally spilling it all over the stove. The same is with smooth glass cooktops, especially when it comes to spilling sugary liquids. Not only does such substance leave marks on the cooktop, but also discolor its surface, which is impossible to remove. Although it is not noticeable on black ceramic surfaces, make sure to clean up the spill immediately.
  • Do not place stirring utensils on the surface of your smooth cooktop while cooking.
  • Never put any hot bakeware made of glass on top of the stove.
  • Avoid using cast iron cookware because its bottoms are usually rough, causing scratches on the stove.

However, if you notice any glitches while using your kitchen stove, do not hesitate to call us upon.

Largest appliance repair company in the Toronto area

If you find yourself struggling with your kitchen unit, it is time to have it checked and repaired by Toronto appliance repair specialists. Our largest appliance repair company in the Toronto area is ready to offer its affordable services to all residents. Furthermore, the trained appliance repair professionals of our servicing center work with a wide range of kitchen and laundry room units, among which are refrigerators, dishwashing machines, ovens, drying machines, and washers respectively. Our reliable stove repairs in the Toronto area are performed by professionally trained handymen with a many-year experience in the industry. Each fixing process is delivered in a few essential steps to provide as best maintenance as possible.


The built-in refrigerators and their features

Our Toronto appliance repair specialists often face issues requiring professional fridge repair with different models of built-in refrigerators. Here we want to share some useful information about modern built-in refrigerators for those customers who are going to buy the new device.

These units are able to offer customers advanced food storage solutions, while perfectly fitting into the kitchen environment. The range of built-in appliances includes:

  • single and double chamber models;
  • side by side and French doors refrigerators;
  • freezers, and wine fridges.

Some manufacturers, for example, Siemens, offer modular built-in designs allowing customers to organize the storage area for food smartly and efficiently.

Selection by size and functionality

Before purchasing a built-in refrigerator the user should evaluate the size and configuration of the kitchen, as well as the habits and needs of the family. For a small kitchen and a small family of 1-2 members, a small built-in fridge-freezer may be enough.

Such small and space-saving models help are handy to have a basic set of products and store a small amount of ready-made food and drinks. Food and semi-finished products that are planned to be cooked and eaten in a not too distant time are usually put in freezers.

Owners of small kitchens needed to have more serious food supplies will also not experience big problems with organizing space. Single-compartment refrigerators of medium height will offer larger refrigerating chambers.

Considering the standard-sized kitchens and the habits of users, manufacturers offer a very wide range of built-in refrigerators with two separate chambers. You can choose them according to their height, the method of installing decorative panels, the size and volume of cameras, the presence of No Frost systems.

Advanced technology to maintain freshness

Advanced technologies are used by refrigeration equipment manufacturers in both stand-alone and built-in models. No Frost systems eliminate frost in freezers and condensation in refrigerated compartments. However, not all manufacturers consider them optimal for high-quality food storage.

For example, a well-known manufacturer Liebherr does not use No Frost in refrigerated compartments to maintain a natural moisture level. A number of their refrigerators use SmartFrost technology instead. Thanks to it the walls of the freezer and the foodstuff much less suffer from snow coat. Also, with this technology used the freezer does not require frequent defrosting. The foamed evaporator in the freezer ensures uniform cooling and helps to save energy.

In addition, for better and longer storage of food, modern built-in refrigerators are equipped with electronic controls and advanced technology for precise control of temperature, humidity, and air circulation. In Whirlpool refrigerators, 6th Sense Fresh Control technology ensures stable temperatures and humidity, which is beneficial for the freshness and shelf life of supplies.

The smartly selected built-in refrigerator will for sure become a nice decoration and necessary tool in your kitchen. Generally, modern devices are reliable and reasonable in cost. However, don’t worry if your fridge stops running someday as our trained appliance repair professionals are ready to cover you by delivering reliable fridge repairs in the Toronto area.

Call Now Button
error: Content is protected!!!